![]() ![]() They will return to 0% if the temperature is 65 C or less. nbfc-linux is short for Notebook Fan Control Linux. ![]() ![]() Once that is done, fancontrol can now control fan speed according to the configurations defined in /etc/fancontrol. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. After creating the fancontrol configuration file, we’ll start the fancontrol daemon: sudo systemctl start fancontrol. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |